Selected Products > |
|
|
|
|
| Description |
The REDESIGNED Cycle Valve IIITM utilizes NO BALL BEARINGS and has been rigorously tested to ensure reliable performance under most operating conditions.
The Cycle Valve IIITM allows you to select a series of jets to cycle On and Off, in a predetermined pulsating pattern.
The compact Cycle Valve IIITM is completely water driven and needs no electricity to operate. |
|
|
The Keypad, Control module, options and accessory "plug in" to simplify installation and service. The switched outputs for the pump and accessory utilize standard 3-prong NEMA receptacles. The MR Series provides switched operation of any single speed pump and accessory with a maximum combined load of 16 AMPS. |
| Required GPM to motor assembly |
7 to 10 GPM @ 8 to 12 psi (1.6 to 2.3m/3h @
0.6 to 0.8 bar)
|
|
|
|
| Required GPM to body assembly |
20 GPM @ 5 to 10 psi Combined 30 GPM @
10 to 20 psi (4.5m3/h @ 0.3 to 0.7 bar
Combined 6.8m/3h @ 0.7 to bar)
|
|
|
|
| Options |
20-0843 Barb tee 3/4” O.D. for
22mm I.D. flexible hose
|
|
Metal Button and Bezel
Assembly 15-9140M
|
|
| Hole Size |
|
|
Use 1 3/8” hole saw
|
|
| Orange |
|
|
|
Lights for 2 seconds upon initial
power up of unit, Indicates system
is working
|
| Green |
|
|
|
System Ready Light (if water level
option is connected, indicates that
water level Height is adequate)
|
| Red |
|
|
|
Lights when pump is running
|
| Approval |
|
|
|
09-BELITE 12V Bath Light
09-BLTLED LED Bath Light
|
